Showroom Prog; Factory Default Setting; To Close The "Settings J" Menu - Miele G 1870 Operating Instructions Manual

Settings menu J
Demo. programme
For showrooms only
The dishwasher is fitted with three
demonstration programmes for
showroom use.
The "Demo programme" and "Demo in
continuous loop" programmes
demonstrate operation and functions.
Demo programme
–
The programme is started by
pressing any button. It will run
through once and then has to be
started again.
Demo in continuous loop
–
This programme will begin as soon
as you switch it on and then will play
in a continuous loop until you switch
it off.
Demo with sound
–
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
Switching on a demo programme
^ Select the option you want and
confirm this with
^ Confirm
Switch demo programme
on? OK
with
^ Press any button to start the Demo
programme you have selected.
^ To cancel it, press any button and
confirm it with the OK button.
80
:
:
:
OK
.
Switching off the Demo programme
^ Select the
Off
OK
with .
^ Confirm
Switch demo programme
off? OK
with
Factory default
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.
^ Confirm the question
default settings?
^ Confirm the message
reset to factory default.

To close the "Settings J" menu

Press the +C button to come out of the
"Settings J" menu and return to the
main menu.
option and confirm this
Reset factory
OK
with .
All settings
with
OK
.