Table of Contents
Advertisement
Before using for the first time
"Add salt" message
^ Fill the salt reservoir with dishwasher
salt for reactivation when the F
salt
message appears. (If it appears
during a programme, wait until the
end of the programme).
^ Confirm by pressing the middle
button.
The "Add salt" message will go out.
After the salt reservoir has been filled,
the "Add salt" message may still appear
in the display if the salt concentration
has not yet reached the correct level.
If this is the case, press the middle
button again.
The "Add salt" message will not appear
if the dishwasher has been
programmed for a water hardness level
of less than 0.7 mmol/l (4°d - German
scale).
,
After refilling the salt reservoir,
run the Pre-wash or Short
programme immediately (without
any crockery in the dishwasher) to
remove any traces of salt from the
cabinet.
20
Add
Advertisement
Table of Contents
