Rinse Aid; Autoopen; And Confirm Your Selection With The - Miele PG 8081i Operating Instructions Manual

Rinse aid

You can adjust the rinse aid dosage for
best results. The rinse aid dosage can
be set from approx. 0-6 ml. The factory
default setting is 3 ml.
If spots appear on crockery and
glassware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
^ Select the rinse aid dosage you want,

and confirm your selection with the

middle button.

AutoOpen

In order to help the drying process, the
door will automatically open a little at
the end of the programme (except
Pre-wash, Short and Beer glasses). See
the Programme chart.
With the Medium, Intensive and
Glasses programmes, AutoOpen is only
activated with the Additional drying
function (see "Additional functions,
Additional drying").
This function can be deactivated if
wished.
^ Select the setting you want, and
confirm your selection with the
middle button.
,
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Settings menu
71