Table of Contents
Advertisement
Before using for the first time
Display
General
The display is used to select or set the
following:
– the programme
– the delay start time
– settings
During a programme, the display
shows the following:
– the stage the programme is at
– the estimated time left for the
programme to run
– any relevant fault messages and
notes
To save energy, the dishwasher will
switch to Standby mode after a few
minutes if you do not press any
buttons or if no programme is
running. It will switch off completely
a few minutes after that (see
"Operation, Standby").
Press the - button to switch the
dishwasher back on again.
16
Settings menu
The Settings menu is used to alter the
machine's electronics to suit different
requirements.
You access the settings menu by
pressing a specific button combination.
See "Settings menu" for more details.
In the Settings menu, the normal
functions of the buttons underneath the
display are switched off so that these
buttons can be used to select and
confirm Setting options.
The arrows on the left and right of the
display, indicate further options. You
can use the button underneath the
display on the left or right, as
appropriate, to select these further
options.
The middle button underneath the
display is used to confirm a message or
setting and also to move to the next
menu or to another menu level.
(
A tick will appear beside the option
which is currently selected.
Advertisement
Table of Contents
