Specifications - Nautilus T618 Owner's Manual

SPECIFICATIONS

Power Requirements:
Operational Voltage:
Operating Current:
Heart Rate Chest Strap:
Maximum User Weight:
Total Surface Area (footprint) of equipment: 18,919 cm
Maximum Inclined Deck Height:
Machine Weight:
Sound Emission: Less than 70 db average without load. Noise emission under
load is higher than without load.
DO NOT dispose of this product as refuse. This product is to be recycled.
For proper disposal of this product, please follow the prescribed methods
at an approved waste center.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard, level surface. Allow a workout area of a minimum 2.2 m x 4 m (86" x 157"). Be sure that the workout space you are
utilizing has adequate height clearance, taking into consideration the height of the user and the maximum incline of the
machine.
Basic Assembly Tips
Follow these basic points when you assemble your machine:
• Read and understand the "Important
Safety Instructions" before assembly.
• Collect all the pieces necessary for
each assembly step.
• Using the recommended wrenches,
turn the bolts and nuts to the right
(clockwise) to tighten, and the left
(counterclockwise) to loosen, unless
instructed otherwise.
• When attaching 2 pieces, lightly lift
and look through the bolt holes to help
insert the bolt through the holes.
• The assembly can require 2 people.
8
120V
120V AC, 60Hz
15 A
1 CR2032 battery
158.8 kg (350 lbs.)
43.7 cm (17.2 inches)
approx. 109.1 kg (240.5 lbs)
2.2 m
( 86" )
2
95.5 cm
(37.6")
4 m ( 157" )
0.6m
( 24" )
0.6m
( 24" )
159.5 cm
(62.8")
198.1 cm
(78")
169 cm
(66.6")
139.3 cm
(54.9")
2m
( 79" )