Setting The Green Button Function - Ricoh WG-30W Operating Manual

2
Use the four-way controller (45) to switch between O (On)
or P (Off).
O(On)
P (Off)
The setting is saved.
Instant Review 1p.58

Setting the Green Button Function

3
You can assign one of the following functions to the Green button: [Green Mode]
(p.65) or [Fn Setting] (p.93). You can activate the assigned function by just
pressing the Green button.
When the shooting mode is set to 9 (Green) mode, the Green Button setting
from the [A Rec. Mode] menu is disabled. Switch to a mode other than 9
to access [Green Button] in the [A Rec. Mode] menu.
Assigning a Function to the Green Button
1
Use the four-way controller (23) to select [Green Button] in
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23)
to select a function you want to
assign.
4
Press the 4 button.
The setting is saved.
[Green Mode] is assigned to the Green button as the default setting.
92
Instant Review is displayed.
Instant Review is not displayed.
Green Button
Green Mode
Fn Setting
Cancel
MENU
OK
OK