Setting The World Time - Ricoh WG-30W Operating Manual

Turning the Alarm Off
The Clock Display appears and the alarm rings
for one minute when the set time is reached
while the camera is turned off.
You can stop the alarm by pressing any button
on the camera while the alarm is ringing.
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, it will not ring when Interval Shot or Interval Movie
is set.

Setting the World Time

The date and time selected in "Setting the Date and Time" (p.42) and "Changing
the Date and Time" (p.150) serve as the W (Hometown) date and time. By using
the world time function, you can display the time in the city that you select as X
(Destination). This is useful when taking pictures in a different time zone.
To Set the Destination
1
Use the four-way controller (23) to select [World Time] in the
[W Setting] menu.
2
Press the four-way controller
(5).
The [World Time] screen appears.
3
Use the four-way controller (23) to select X (Destination).
4
Press the four-way controller (5).
The [Destination] screen appears. The city that is currently selected blinks on
the map.
World Time
Select Time
Destination
New York
Hometown
New York
MENU
6
DST
OFF OFF OFF
14:25
DST
OFF OFF OFF
14:25
153