Setting Pixel Track Sr - Ricoh WG-30W Operating Manual

The D-Range setting cannot be set in some shooting modes. Refer to
"Functions Available for Each Shooting Mode" (p.178) for details.

Setting Pixel Track SR

You can set this function to correct for camera shake when taking still shots. If
Pixel Track SR is set to O (On), the camera automatically corrects for camera
shake in the images you shot. The default setting is P (Off).
Shake reduction settings in C (Movie) and
are configured under Movie SR (p.103).
3
1
Use the four-way controller (23) to select [Pixel Track SR] in
the [A Rec. Mode] menu.
2
Use the four-way controller (45)
to switch between O (On) or P
(Off).
O(On)
P (Off)
The setting is saved.
3
Press the 3 button.
The camera returns to capture mode.
• In 9 (Green), C (Movie),
modes, the Pixel Track SR is fixed at P (Off).
• Pixel Track SR does not function when the flash discharges even if [Pixel
Track SR] is set to O (On).
The Pixel Track SR may not be effective when the shutter speed is slow. We
recommend you turn off the [Pixel Track SR] setting P (Off) and use a tripod
for slow shutter speeds.
88
Automatically corrects for
camera shake.
No correction for camera
shake.
(Underwater Movie) mode
Rec. Mode
Sensitivity
AUTO ISO Range
EV Compensation
D-Range Setting
Pixel Track SR
Face Detection
Exit
MENU
(Underwater Movie), and S (Fireworks)
2/4
AUTO
ISO125-800
0.0