Disconnecting The Camera From The Computer; System Requirements - Ricoh WG-30W Operating Manual

Disconnecting the Camera from the Computer

When the camera is being used by an application, it cannot be disconnected until
the application is closed.
Windows
1
Click the
located at the bottom-right corner of the desktop.
2
Click [Eject (the device connected)].
The message appears.
3
Disconnect the USB cable from the Windows PC and your
camera.
Macintosh
1
Drag [NO NAME] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name to the
trash.
2
Disconnect the USB cable from the Macintosh and your
camera.
7
The camera will automatically switch to playback mode when the USB cable
is disconnected from the camera or the computer.

System Requirements

The following system requirements must be met for you to fully enjoy the images
captured with the camera on a computer.
• Supported OS should be pre-installed in a computer and updated to the
latest version.
• Working status is not guaranteed for all computers.
• System requirements mentioned here are the minimum for playing back or
editing movies.
170
(Safely Remove Hardware) icon in the task bar