Connecting The Camera To A Communication Device - Ricoh WG-30W Operating Manual

Connecting the Camera to a Communication
Device
Setting up the Camera
1
Press the Green button in A
mode to display the screen on
the right.
The camera enters Wi-Fi mode. After
pressing the 4 button, follow the "Setting
up the Communication Device" procedure
below to connect the camera to the
communication device.
No operations can be done on the camera except the Green button and
turning the power on and off.
Setting up the Communication Device
1
Set the wireless LAN (Wi-Fi) function on the communication
device to ON and display the setting screen.
2
Select the SSID of the camera from the list of access points.
3
Enter the security code (Password).
4
Check that the camera and the communication device are
8
connected via the wireless LAN.
Starting the Browser
Use a web browser on the communication device in order to use the remote
control functions. The following browsers are compatible with the functions. (As
of December 2014)
• Chrome
• Safari
1
Start the browser on the communication device.
174
Create a Wi Fi connecti Create a Wi-Fi connection Create a Wi-Fi connection
from an external device from an external device
SSID SSID
RICOH_ RICOH_
Password Password
0 0
Cancel Cancel
MENU MENU
e
O OK OK