Table of Contents
Advertisement
Using the Camera with a
Communication Device
This camera has a built-in Wi-Fi™ function. By directly
connecting to a communication device such as smartphones
and tablets via wireless LAN, the camera can be operated from
the communication device and images can be shared with
others via social networks or e-mail.
Enabling the Wi-Fi™ Function
The Wi-Fi™ function is disabled when the camera is turned on.
Enable the function using one of the following methods.
• Setting from the menus (p.96)
• Using the Y button (p.96)
When the Wi-Fi™ function is
enabled, a beep sounds and the 7
(white) icon indicating the wireless
LAN status is displayed on the status
screen and Live View screen. When
8 (gray) is displayed, a connection
with the communication device is not
established correctly.
t Memo
• Even after the Wi-Fi™ function is enabled, it returns to an
inactive state when the camera is turned off and on again.
Also, when the camera enters C mode, the Wi-Fi™ function
is disabled.
• Auto Power Off is not available while a Wi-Fi™ connection is
established or images are being transferred. If Auto Power
Off is activated while a connection is not established, the Wi-
Fi™ function is disabled. The function is enabled when the
camera recovers from Auto Power Off.
• The Wi-Fi™ function is disabled during the USB connection.
u Caution
• Do not attempt to use the Wi-Fi™ function in a location where
the use of wireless LAN devices is restricted or prohibited,
such as on airplanes.
• When using the Wi-Fi™ function, observe local laws and
regulations governing radio communication.
• If a memory card with a built-in wireless LAN function (such
as an Eye-Fi card or a Flucard) is used, radio wave
interference may occur. When this occurs, disable the Wi-
Fi™ function of the camera.
AUTO
AUTO
99999
99999
5
95
Advertisement
Table of Contents
