Adjusting The Handle Height; Starting The Engine; Using The Self-Propel Drive - Toro 20381 Operator's Manual

Adjusting the Handle Height

You may raise or lower the handle to a position
comfortable for you.
Rotate the handle lock, move the handle to one of three
positions, and lock the handle into position (Figure 12).
1. Handle lock

Starting the Engine

1. Pull the blade control bar to the handle (Figure 13).
2. Turn the ignition key (electric-start model only)
(Figure 14) or pull the recoil start handle (Figure 15).
Figure 12
2. Handle positions
Figure 13
Note: If the mower does not start, contact an
Authorized Service Dealer.

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 16).
10
Figure 14
Figure 15
Figure 16