Useful Adjustment Settings; Image Position; Audio Only; Input Select - Sharp LC-26GA5X Operation Manual

Useful adjustment settings

Image position

For adjusting a picture's horizontal and vertical position.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Position", and then
press ENTER.
4
Press a/b to select "H-Pos." or "V-Pos.".
H-Pos. [0] –10
V-Pos. [0] –20
Reset
5
Press c/d to adjust the item to your desired

position.

NOTE
• For resetting all adjustment items to the factory preset values,
press a/b to select "Reset", and then press ENTER.
• Adjustments are stored separately according to input
source.
Selected item
H-Pos.
Centres the image by moving it to the left or right.
V-Pos. Centres the image by moving it up or down.

Audio Only

When listening to music from a music programme, you
can set the display off and enjoy audio only.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Audio Only", and then
press ENTER.
4
Press c/d to select "On", and then press
ENTER.
Selected item
Audio is output without screen image.
On
Off Both screen images and audio are output.
NOTE
• When you make operations that change the picture on
the TV such as by changing the input source, the Audio
Only function is set to "Off".
+10
+20
Description
Description

Input Select

Selecting input source
Can use for selecting the input source.
1
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the TV.
2
Press TV/VIDEO on the remote control unit
or TV/VIDEO on the TV to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
Selecting input signal type
For setting the signal type of external equipment.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press ENTER.
4
Press a/b/c/d to select a signal type you
want to set, and then press ENTER.
Input type
INPUT 1
INPUT 2
INPUT 3
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
Selectable item
AUTO, COMPONENT, VIDEO
AUTO, S-VIDEO, VIDEO
AUTO, COMPONENT, VIDEO
33