Touch Screen - Crestron Isys i/O TPMC-4X Operation Manual

™
Isys i/O Handheld WiFi Touchpanel
12 • Isys i/O
™
Handheld WiFi Touchpanel: TPMC-4X
Touch the Setup button with the stylus or your finger to display the following
TPMC-4X setup screen.
Setup Screen
The setup screen enables basic configuration procedures prior to regular operation of
the touchpanel.
NOTE: During regular operation of the touchpanel, there are two ways to activate
the setup functions: either place a button on the project main page and assign the
reserved join number (17242) that activates Setup, or hold your finger on the screen,
use the stylus to press the Reset button, and continue to keep your finger on the
screen until the setup screen appears (about 90 seconds).
SETUP FUNCTIONS
The setup functions control the basic operation of the TPMC-4X.
Disable System Messages
Selecting the Disable System Messages button allows you to disable pop-up
messages that warn of communication failure between the TPMC-4X and the WAP
or the control system.

Touch Screen

Selecting the Touch Screen button displays the following "Stylus Properties"
window that allows you to set stylus properties and perform a screen calibration.
Use the supplied stylus and follow the instructions to customize the unit's sensitivity
to your use of the stylus.
NOTE: The double-tap function is not supported at this time.
Crestron TPMC-4X
Operations Guide - DOC. 6499