Crestron SW-SIMPL Installation & Operating Manual page 46

Software
Network System View of CNMSX-PRO (top), Detail System View of CNXCOM-6 (bottom)
Select Serial Driver to be Installed and Drop into Appropriate Control Port
36 • Crestron SIMPL Windows
Example-Serial Driver Configuration
Much of the equipment in the A/V industry is controlled by serial communication
standards like RS-232, RS-422, and RS-485 for example. The control system
specified for our design is a CNMSX-PRO which has a CNXCOM-6 control card
installed from the factory. The CNXCOM-6 is a two-way serial card that supports
RS-232, RS-422, and RS-485. Click on the CNXCOM-6 to display the six serial
ports in Detail System View.
Some serial cards may have a default driver already installed. If this is not the
preferred drive, replace it by selecting another driver. Select the serial driver from
the Device Library. In this example a ST-COM/CNXCOM two-way serial driver is
selected. Click and drag the ST-COM/CNXCOM and drop it into Port A of the
CNXCOM-6 control card.
Right mouse click on the driver to configure the device settings or delete the device.
For this example, select Configure.
Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C