Crestron SW-SIMPL Installation & Operating Manual page 42

Software
32 • Crestron SIMPL Windows
Net ID
The Net ID tab displays the network ID of the particular NetDevice.
Device Settings: Net ID Tab
UI Project (for touchpanels only)
The UI Project tab refers to the User Interface Project Name as given in
VisionTools™ Pro-e. Touchpanel designs from Crestron's VT Pro-e software can be
referenced and brought into the SIMPL Windows program. Join numbers and
buttons are brought in when a UI project is specified. This feature can save an
enormous amount of typing and referring back and forth between VT Pro-e and
SIMPL Windows.
Device Settings: UI Project Tab
Chain (for touchpanels only)
NetDevices can be chained together under the Chain tab. Chaining means that
multiple touchpanels are programmed exactly the same. One touchpanel acts as a
'master' to which the others are chained.
Begin to chain by selecting one of the 'slave' touchpanels. Under the right mouse
menu click Configure and select the Chain tab. Select the Net ID of the 'master'
panel.
Crestron SIMPL™ Windows
Installation & Operations Guide – DOC. 5728C