Crestron SW-SIMPL Installation & Operating Manual page 176

Software
166 • Crestron SIMPL Windows
Trace Window
Pause Trace Alt+P Suspends Incoming Signal transitions in the
Clear Alt+C Clear All Signal Transitions from the Trace
Add Signal to Status
Window
Exclude Signals from
Trace Window...
Trace All Signals
Trace Only Signals in
Status Window
Macro Trace On
Macro Trace Off
Show Analogs in
Trace Window
Show Serials in Trace
Window
Alt+T Insert a Time Stamp Placeholder in the Trace
Insert Time Stamp
Put Time Stamp on All
Signals
Save To Disk
Log To Disk
Options
Issue a Command to the Rack to Soft Reset the Rack
Reset Rack
Synchronize the State of Signals in the Status Window
Synchronize with
with the Rack (This Command Results in False Data
Rack
Being Added to the Trace Window)
Find Rack Locate the Rack at a Different Baud Rate and Switch it to
the Currently Set Baud Rate of the PC
Show Analogs as Toggle Between Showing an Analog Signal's Value as a
Percentage or a Number Between 0 and 65535 in the
Percent
Trace and Status Windows
Show Signals as Toggle Between Showing an Serial Signal in HEX Format
or as a Raw String in the Trace and Status Windows
HEX
Help
Help Topics
About Test Manager
Crestron SIMPL™ Windows
Trace Window
Window
Add Selected Signals in the Trace Window to the
Status Window
Do Not Trace These Signals
Show All Signal Transitions
Show only the Transitions of Signals that are in
the Status Window
Show the Signal Transitions of Signals that are in
Macros
Hide the Signal Transitions of Signals that are in
Macros
Include Analog Signals in Trace Window
Include Serial Signals in Trace Window
Window
Insert a Time Stamp Placeholder on all Signals in
the Trace Window
Save Signal Transitions in the Trace Window to a
User Specified File
As Signal Transitions Occur, Put Them in a User
Specified File (Even When in Pause Mode)
Show help Topics
Show About Box with Test Manager Version
Installation & Operations Guide – DOC. 5728