Table of Contents
Advertisement
Software
Crestron RJ45 Cabling
A 15-foot, RJ45, 10-position, NET/VIDEO cable is supplied with the TPS-IMC. The cable is
available to provide optional lengths; part number TPS-CBL-3 is the 3-foot version,
TPS-CBL-6 is a 6-foot version, and TPS-CBL-9 is the 9-foot version. Contact Crestron
customer service for further information.
A 15-foot, RJ45, Siamese (two cables joined together) cable is available from Crestron. The
cable minimizes the number of individual cables attached to the touchpanel. The Siamese
cable consists of a 10-position NET/VIDEO cable, an 8-position AUDIO cable and is
available to provide optional lengths. Part number TPS-CBL-S3 is the 3-foot version,
TPS-CBL-S6 is a 6-foot version, and TPS-CBL-S9 is the 9-foot version. This cable may be
used for any system configuration when NET/VIDEO and AUDIO connections are
necessary. Contact Crestron customer service for further information.
A 15-foot, RJ45, Triamese (three cables joined together) cable is supplied with the
TPS-IMC-BV. The cable minimizes the number of individual cables attached to the
touchpanel. The Triamese cable consists of a 10-position NET/VIDEO cable, 10-position
RGB video cable, an 8-position AUDIO cable and is available to provide optional lengths.
Part number TPS-CBL-T3 is the 3-foot version, TPS-CBL-T6 is a 6-foot version, and
TPS-CBL-T9 is the 9-foot version. This cable may be used for any system configuration
when NET/VIDEO, RGB video and AUDIO connections are necessary. Contact Crestron
customer service for further information.
DB9F Adapter and RJ11 Modular Cable
To program the touchpanel for serial communication at the RS-232 port, a DB9F to RJ11
adapter and 6-conductor modular (RJ11) cable is required. These components are not
supplied but are part of the SmarTouch Programming Kit (Crestron part number ST-PK). If
already available, use these components. If needed, contact Crestron customer service. A
cable assembly that consists of a DB9F to RJ11 adapter and modular cable is also available
from Crestron. Contact Crestron customer service for part number STCP-502.
The DB9F to RJ11 adapter is available commercially or contact Crestron customer service for
part number 15556. For RJ11 modular cable specifications, refer to the latest revision of the
Crestron Network Modular Cable Requirements (Doc. 5682). This document can be obtained
from the Products page (PRODUCT MANUALS section, manuals for software and wiring
diagrams section) or Downloads page (CABLES and MANUAL Libraries) of Crestron's
website (www.crestron.com). Search for MODULAR.PDF. New users are required to register
in order to obtain access to the site.
26 • Serial Mouse Control Driver
Crestron Serial Mouse Control Driver
Programmer's Guide - DOC. 5916A
Advertisement
Table of Contents
