Table of Contents
Advertisement
Crestron Serial Mouse Control Driver
Serial Communication #3 - Lectern Touchpanel with TPS-XVGAL
VGA
PORT
PC
SERIAL COMMUNICATION #3 - LECTERN TOUCHPANEL WITH TPS-XVGAL CARD
REF
1
A
2
B
3
C
Control System
1
A standard stranded VGA monitor cable with DB15F to BNC-5 adapter is required. Both are commercially available.
2
This connection can be made via a modular RJ11 cable (supplied with touchpanel) and DB9F to RJ11 adapter. For
cabling specifications, refer to Appendix 3 on page 25 of this guide.
3
During serial communications, the control system and Cresnet wiring are required for touchpanel basic functionality
and operating power. For Cresnet 4-wire specifications, refer to Appendix 3 on page 25 of this guide.
PC to Touchpanel Cresnet Communication
For Serial Mouse Control Driver operation using Cresnet communication from the PC to the
touchpanel, refer to the steps below.
Cresnet Communication #1 - Tilt Touchpanel with TPS-XVGA
VGA
PORT
PC
Programmer's Guide - DOC. 5916A
A
RGB CABLE
COMMUNICATIONS CABLE
B
COM
PORT
CRESTRON
CONTROL SYSTEM
FROM
DEVICE
PORT
VGA
PC
COM
PC
NET
3. Proceed to
"VT Pro-e
1. Refer to the appropriate (for TPS-XVGA, TPS-XVGA-BV, or TPS-XVGAL
card) diagrams and tables below and on the next page and make the cable
connections.
A
COMM. CABLE
B
COM
COM
PORT
PORT
C RESTRON
NET (OR
CRESNET)
PORT
C
CRESNET WIRING
NET (OR
CRESNET)
PORT
PRO F ESSIO NAL CONTRO L PRO CESSOR
M ENU
B KLT
2
PRO
CABLING REQUIRED
CONNECTOR
to CONNECTOR
DB-15, male
BNC-5, male
DB-9, female
RJ-11, 6-pin
4-wire Cresnet
4-wire Cresnet
Programming" that begins on page 16.
RGB CABLE
CONTROL
SYSTEM
PRO F ESSIO NAL CO NT ROL PROCESSO R
MENU
BKLT
2
PRO
TPS-IMC
(OR TPS-IMW)
CRESNET
WIRING
NET
C
PORT
Software
LECTERN TOUCHPANEL
(OR TPS-TPI) WITH
TPS-XVGAL
RGB INPUT
TO
PORT
RS-232
PORT
NET
PORT
TO
DEVICE
Touchpanel
Touchpanel
Touchpanel
TILT TOUCHPANEL
WITH TPS-XVGA
D
RGB
PORT
NET/VIDEO
PORT
NET/VIDEO
PORT
Serial Mouse Control Driver • 7
PORT
RGB
RS-232
NET
Advertisement
Table of Contents
