Daikin R24GV2S Service Manual page 8

Removal of Fan Motor / Outdoor Fan
Step
2. Remove the outdoor fan.
1 Remove the nut and
remove the outdoor fan.
3. Remove the fan motor.
1 Remove the 4 screws
and remove the fan
motor.
6
Procedure
Lock washer
Points
Nut size : M8
When reassembling, fit the
(R5438)
D-cuts of the lock washer
and the shaft of fan motor.
D-cut
(R12834)
Lock washer
Be sure to remove the lower
screws first. If the upper
screws are removed first, the
fan motor may tilt or fall
because the center of its
gravity is toward the front.
It may cause injuries.
(R5439)
Removal Procedure
Si01-782
13 mm
(R12301)
D-cut
(R12835)