Inventory - Grizzly T32540 Owner's Manual

Inventory

The following is a list of items shipped
with your tool. Before beginning setup, lay
these items out and inventory them.
If any non-proprietary parts are missing
(e.g. a nut or a washer), we will gladly
replace them; or for the sake of expediency,
replacements can be obtained at your
local hardware store.
If you cannot find an item on this
list, carefully check around/inside
the tool and packaging materials.
Often, these items get lost in pack-
aging materials while unpacking or
they are pre-installed at the factory.
-12
-
Box 1 (Figures 4 & 5)
A. Dual-Spindle Doweling Jointer ........... 1
B. Drill Bits 8mm ..................................... 2
C. Hex Wrench 2.5mm ........................... 1
A
Figure 4. Model T32540 Doweling Jointer.
B
Figure 5. Loose inventory.
Model T32540 (Mfd. Since 10/20)
Qty
C