Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Refer to Figures 1–2 and the following
descriptions to become familiar with the
basic controls of this tool.
A. Fence Angle Lock Knob: Locks fence
to desired angle of operation.
B. Fence: Orients tool to workpiece at
specified angle.
C. Fence Angle Scale: Indicates approxi-
mate angle of fence. Detents allow
setting angle at 22.5°, 45°, and 67.5°.
D. Depth Pointer: Indicates current depth
setting.
E. Depth Gauge: Sets drilling depth
between 0"–1½".
F. ON/OFF Switch: Starts and stops
motor. Tool will remain running while
switch is in ON position.
A
B
C
Figure 1. Fence angle, drilling depth, and
power controls.
-8
-
F
E
D
G. Sliding Base: Houses drill bits. Spring
action retracts bits after drilling.
H. Dust Port: Connects to a dust collec-
tion system (not included) with a dust
adapter (not included) to help prevent
dust build up during drilling operations.
I.
Jig Bar: Enables quick and accu-
rate alignment with doweling jigs (not
included).
J. Jig Teeth: Enables quick and accu-
rate alignment with doweling jigs (not
included).
K. Fence Height Pointer: Indicates cur-
rent height setting.
L. Fence Height Lock Knob: Locks
fence at desired height of drilling.
M. Fence Height Adjustment Knob:
Adjusts fence to desired height.
N. Fence Height Scale: Indicates height
of drill bits between
G
H
Figure 2. Fence height, jig teeth, and jig
bar components.
Model T32540 (Mfd. Since 10/20)
⁄
"–1
⁄
".
3
11
8
16
N
M
L
K
J
I
Advertisement
Table of Contents
