Cradlepoint MBR1200 Product Manual page 80

MBR1200| USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT
Modem 4G Auto-Reconnect Policy for DUAL
6.3.3
3G/4G Modems
If a 4G connection is dropped, or can't be established, the router
will use 3G mode instead. The settings tell the MBR1200 when it
should automatically retry the 4G connection. If a 4G connection
cannot be made, the 3G connection will be reestablished or
resumed.
Retry 4G Automatically.

More Often (based on data rate)

Less Often (based on data rate)

More Often (based on timer)

Less Often (based on timer)

Never (Default)

Custom
Data Rate Threshold (KB/Sec). Select Data Rate Threshold.
Duration Threshold (seconds). Select Duration Threshold.
If the rate of data on the 3G connection falls below Data Rate
Threshold for longer than the Duration Threshold, the router will
attempt to upgrade the 4G connection automatically.
If the Data Rate Threshold is set to a negative value, the router will attempt to upgrade the 4G connection automatically every Duration
Threshold Seconds.
NOTE: Some dual mode modems do not allow simultaneous 3G and 4G connections. For these types of modems, service to the internet will be
interrupted for several seconds while trying to upgrade the connection to 4G.
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 78