Cradlepoint MBR1200 Product Manual page 70

MBR1200 | USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT
The wizard will prompt you to enter the PIN for the device, or ask you to press the
configuration button on the device. If the device supports Wi-Fi Protected Setup and
has a configuration button, you can add it to the network by pressing the
configuration button on the device and then the on the router within 60 seconds. The
status LED on the router will flash three times if the device has been successfully
added to the network.
There are several ways to add a wireless device to your network. Access to the
wireless network is controlled by a "registrar". A registrar only allows devices onto the
wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected
Setup button on the device. The router acts as a registrar for the network, although
other devices may act as a registrar as well.
Clicking the Add Wireless Device Wizard button starts the wizard.
"PIN" Option
Welcome to the Add Wireless Device Wizard.
Step 1: Select Configuration Method for Your Wireless Network. Choose
configuration method that your wireless device is capable of supporting (refer to the
documentation that came with your wireless adapter).
Select PIN. Select this option if your wireless device supports PIN. (Push Button
instructions follow in next section).
Click Next.
Step 2: Connect Your Wireless Device. Enter the PIN of your wireless device, then
click on the Connect button.
The PIN method of WPS allows a device to search for the Wi-Fi device attached to
that PIN number and setup a connection and security between that device and the
router.
All devices supporting the WPS PIN method will have a PIN number associated to
them in product packaging, documentation or labeling.
(continued)
© 2010 CRADLEPOINT, INC.
Click Next.
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 68