Cradlepoint MBR1200 Product Manual page 58

MBR1200 | USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT
With the above example application rule enabled, the router will open up a range of ports from 6000-6200 for incoming traffic from the Internet,
whenever any computer on the internal network opens up an application that sends data to the Internet using a port in the range of 6500-6700.
When you‟re done editing the settings, you must click the Save Settings button at the top of the page to make the changes effective and
permanent.
5.9.2 Applications Rules
The section shows the current routing table entries. Certain required
routes are predefined and cannot be changed. Routes that you add
can be changed by clicking the Edit icon or can be deleted by
clicking the Delete icon. When you click the Edit icon, the item is
highlighted, and the Application Rules section is activated for
editing. Click the Enable check box at the left to directly activate or
de-activate the entry.
After you‟ve completed all modifications or deletions, you must click the Save Settings button at the top of the page to save your changes. The
router must reboot before new settings will take effect. You will be prompted to Reboot the Device or Continue. If you need to make additional
settings changes, click Continue. If you are finished with all configuration settings, click the Reboot the Device button.
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 56