Cradlepoint MBR1200 Product Manual page 61

MBR1200 | USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT
Add Traffic Shaping Rule
5.10.2
A Traffic Shaping Rule identifies a specific message flow and
assigns a priority to that flow. For most applications, automatic
classification will be adequate, and specific Traffic Shaping Rules
will not be required.
Traffic Shaping supports overlaps between rules, where more than
one rule can match for a specific message flow. If more than one
rule is found to match the rule with the highest priority will be used.
Enable. Specifies whether the entry will be active or inactive.
Name. Create a name for the rule that is meaningful to you.
Priority. The priority of the message flow is entered here--1
receives the highest priority (most urgent) and 255 receives the
lowest priority (least urgent).
Protocol. The protocol used by the messages.
Local IP Range. The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.
Local Port Range. The rule applies to a flow of messages whose LAN-side port number is within the range set here.
Remote IP Range. The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.
Remote Port Range. The rule applies to a flow of messages whose WAN-side port number is within the range set here.
Save/Update. Record the changes you have made.
Clear. Re-initialize this area of the screen, discarding any changes you have made.
When you are done editing the settings, you must click the Save Settings button at the top of the page to make the changes effective and
permanent.
(continued)
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 59