TP-Link TL-WR843N User Manual page 67

PC on the LAN, that PC will always receive the same IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP
settings.
MAC Address - The MAC address of the PC for which you want to reserve an IP address.

Reserved IP Address - The IP address reserved for the PC by the Router.

Status - The status of this entry, either Enabled or Disabled.

To Reserve an IP address:
Click the Add New... button. Then Figure 4-33 will pop up.
1.
2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disable All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the previous
page.
TL-WR843N
Figure 4-33 Address Reservation
Figure 4-34 Add or Modify an Address Reservation Entry
300Mbps Wireless AP/Client Router User Guide
- 57 -