Parental Control - TP-Link TL-WR843N User Manual

Web Management Port - Web browser access normally uses the standard HTTP service port

80. This Router's default remote management web port number is 80. For greater security,
you can change the remote management web port to a custom port by entering that number
in the box provided. Choose a number between 1 and 65534 but do not use the number of any
common service port.
Remote Management IP Address - This is the current address you will use when accessing

your Router from the Internet. This function is disabled when the IP address is set to the default
value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to
255.255.255.255, then all the hosts can access the Router from internet.

Note:
1) To access the Router, you should type your Router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port number.
For example, if your Router's WAN address is 202.96.12.8, and the port number used is 8080,
please enter http://202.96.12.8:8080
password. After successfully entering the username and password, you will be able to access
the Router's web-based utility.
2) Be sure to change the Router's default password to a very secure password.

Parental Control

Choose menu "Parental Control", and you can configure the parental control in the screen as
shown in Figure 4-46. The Parental Control function can be used to control the internet activities of
the children, limit the children to access certain websites and restrict the time of surfing.
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure 4-46 Remote Management
in your browser. Later, you may be asked for the Router's
- 68 -