Cortelco Colleague 2210 Owner's Instruction Manual page 9

After the adapter is connected, the display will show as indicated below for setting.
1. [ SET LANGUAGE
select the language. E - English, F - French, S - Spanish, and then press the DIAL
button to confirm the selection.
[
2. When LCD CONTRAST
contrast darker, and then you can press REVIEW DOWN (
contrast back to the preset.
3. When [SET AREA CODE] appears, use REVIEW UP (
DOWN ( ) button to set your local area code.
REVIEW UP (
REVIEW DOWN (
When you are finished setting the local area code, press Dial.
4. When [SET LDS CODE] appears, press REVIEW UP( ) button to change the long
distance code from -, 0, 1, 2, -9. When you are finished, Press DIAL. The display
will indicate as shown (Stand-By Screen) and be ready to receive incoming calls.
You have to set the LDS code as 1 when you are in the USA or Canada.
5. The time and date are automatically set when a caller ID (CID) number is received.
The unit will keep the current time accurately, and is updated each time a CID
number is received.
After you have set up the unit completely for the first time, use the MENU button to
review or reprogram the Language, Area Code or LDS Code.
] appears on the display. Press the REVIEW UP ( ) button to
E
SET LANGUAGE
]
appears, press REVIEW UP (
2
LCD CONTRAST
- - -
SET AREA CODE
) button - to change the digit from -. 0, 1, 2, -9
) button - to move to the next digit.
1
SET LDS CODE
TOTAL CALLS 00
Stand-By Screen
6
) button to set the
) button to set the
) button and REVIEW