Brakes - Volkswagen Golf GTI TCR SEQ 2019 User Manual

Volkswagen Motorsport
Volkswagen Golf
4.11

Brakes

To set-up the brakes, the following pumps can be used in both axles:
Master cylinder
AP 15 MM
AP 15.9 MM
AP 16.8 MM
AP 17.8 MM
AP 19,1 MM
AP 20,6 MM
AP 22,2 MM
AP 23,8 MM
It is not advisable to use more than two pump diameters difference between front and rear.
-
If the master cylinders are replaced, take care on the correct installation and functioning of the
-
brake balance bar. The following link shows how to assembly correctly:
https://tiltonracing.com/wp-content/uploads/2013/07/98-1250-600-Series-Balance-Bars.pdf
On the dashboard screen it is shown the front/rear pressure and the balance percentage. The
-
recommended percentage is 60% front (car delivery).
Brake balance channel:
-
To adjust the brake balance it is recommended to set first the rear brake proportioning valve on position 7,
where it is fully open, and to ensure that the hand brake is not locked. After that, set the desired balance
turning the yellow wheel on the main console. Remember not to press the brake pedal while turning the
wheel.
Set rear brake proportion valve on position on the desired position (standard position: 3)
GTI TCR SEQ User Manual
Push Rod
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
PRT 110
P_BRK_FRONT
P_BRK_FRONT + P_BRK_REAR
Volkswagen Golf GTI TCR SEQ User Manual
Remarks
Car delivery front
Car delivery rear
∗ 100
Page 46