Display Alarms And Shift Lights - Volkswagen Golf GTI TCR SEQ 2019 User Manual

Volkswagen Motorsport
Volkswagen Golf
can only be selected with the car stopped following this process: red (+30) switch ON, yellow (+15)
switch OFF, keep Pit limiter/Starter button pushed and select the speed using the gear shift paddles.
The selected speed can be seen on the AIM MXG display.
Although it is possible to uncouple completely the steering wheel from the column with the engine
-
running, it is not advisable (causes fault messages on the OBD).

2.4 Display alarms and shift lights

Alarm Problem
LED 1 yellow
Low oil pressure
LED 1 green
-
LED 2 red + pop-up
Very low oil pressure
LED 3 purple Low battery voltage
LED 4 yellow Low fuel pressure
LED 5 yellow High water temperature Keep an eye on the values
LED 5 green
-
LED 6 red Too high water
temperature
LED 6 red + pop-up
Critical water
temperature
LED 7 white
High gearbox oil
temperature
LED 8 blue High intake air
temperature
LED 8 white
Steering initialization
needed
LED 1 +LED 5red
GTI TCR SEQ User Manual
Info
Check oil level
Left turn light is active
Big risk to break turbo or engine Slow down, drive to pitlane
Check alternator and poly-V-
belt
Check fuel level
Right turn light is active
Keep an eye on the values
Big risk to break engine
Drive out of slipstream, torque
reductions possible
Drive out of slipstream, torque
reductions possible
Turn steering wheel left and
right, alarm disappears
Pit limiter is active
Volkswagen Golf GTI TCR SEQ User Manual
Safety
Continue if no red light
appears
-
or stop in safe place
Continue
Continue
Continue if no red light
appears
-
Continue; torque
reductions will appear
Slow down, drive to pitlane
or stop in safe place
Continue
Keep an eye on the values
and continue
If alarm stays, problem in
electrical steering rack
Page 13