An appropriate seal can only be achieved with a new dust cap.
Only then is an optimum function and long service life of the wheel bearing guaranteed.
8.2
Wheel Bearing/Wheel Hub on Vehicles
with Drum Brakes, Removing and In‐
stalling
Special tools and workshop equipment required
♦ Puller - Grease Cap - VW637/2-
♦ Camshaft Installer Kit - Sleeve - 3241/4-
♦ Torque Wrench 1332 40-200Nm - VAG1332-
♦ Torque Wrench - VAG1410-
Perform the Following
Removing
– Loosen the wheel bolts.
– Raise the vehicle.
– Remove the wheel.
– Reset brake
– To do so, press wedge upward through a hole in brake drum
using a screwdriver.
– Remove the bolt -1- and remove the brake drum -2-.
– Loosen dust cap from seat by tapping lightly on claw of Puller
- Grease Cap - VW637/2- -1-.
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
8. Wheel Bearing, Drum Brake (Torsion Beam)
175