Driver Control; Main Panel - Volkswagen Golf GTI TCR SEQ 2019 User Manual

Volkswagen Motorsport
Volkswagen Golf

2. DRIVER CONTROL

In this section, it is explained how the driver can handle the different commands and functions of the car
within his range while driving

2.1 Main panel

Lights Switch
Indicator Switch
Function
Ignition switch:
Main switch:
Lights switch:
Turn indicator:
Brake balance:
Notes:
To start the car, always proceed in this order: Main switch, wait until display has booted (VW logo
-
disappears), then ignition switch.
The correct procedure to stop the car is the following:
-
1. Stop the engine using only the yellow switch (ignition switch/KL-15).
2. Wait at least 60 seconds. If the waiting time is lower, the OBD faults memory is not saved.
3. Switch off the car using the red switch (main switch/KL-30).
If this procedure is followed correctly the OBD faults memory is saved and these faults can be
-
checked with the diagnostics tools at any time thereafter. These faults are saved until the memory is
deleted manually using the diagnostics program.
The diagnostics tool DiagRA-LE is recommended for customers to be able to check the cars.
GTI TCR SEQ User Manual
Brake balance
Remarks
It activates the power to all devices. The Main Switch has to be active.
It activates the power supply.
It activates the low beam. High beam and flash activation buttons are placed on
the steering wheel module.
It activates the left and right turn lights. A green alarm on the display appears
showing that the turn light is blinking.
Turning the balance wheel you can balance the brake pressure from front to back
or vice versa.
Do not press the brake pedal while moving the balance wheel.
Through the driver display you can check the front and rear brake pressure and the
balance in percentage.
Volkswagen Golf GTI TCR SEQ User Manual
Ignition Switch
Main Switch
Page 10