Rear Camber And Toe Adjustment - Volkswagen Golf GTI TCR SEQ 2019 User Manual

Volkswagen Motorsport
Volkswagen Golf
Maintain the wishbone regulation plate clean and little oiled between plates.
-
Camber
-5.8º
-5,5º
-5º
-4,5º
-4º
-3,8º
Notes:
Take care with the maximum and minimum camber. Although physically the camber adjuster can
-
reach higher values, it is not recommended due the drive shaft limitations.
4.6

Rear camber and toe adjustment

To reach the rear suspension set-up value is recommended to proceed
as following:
1. Car ride height: put the ride height at your choice through
damper/spring adjustments.
2. Camber: to change the camber is recommended to move the
"boomerang" arm.
3. Toe: to change the toe enlarge or reduce the rear arm.
4. Check: Adjust a second time if necessary.
Notes:
The rear camber regulation does not have relation with the toe movement, so it is possible to change
-
rear camber without any toe movement.
After the camber adjustment job, check that the ball-joint is placed in the middle of its housing.
-
GTI TCR SEQ User Manual
Toe regulation
9,5 turns
7 turns
3,5 turns
0
-3,5 turns
-6 turns
Camber
-2º
-2,5º
-3º
-3,5º
-4º
-4,5º
-5º
Volkswagen Golf GTI TCR SEQ User Manual
Wishbone regulation
1,5 turns = 10' camber
12 turns
8,3 turns
4,5 turns
0
-4 turns
-7 turns
Arm regulation
1,5 turns
1 turns
0,5 turns
0
-0,5 turns
-1 turns
-1,5 turns
Page 37