Volkswagen Motorsport
Volkswagen Golf
3.4 Fusebox
The fusebox is an electronic box that controls the power supply to practically
all devices. Internally, the thermal fuses reset automatically, so changing a fuse
will never be necessary. In case of malfunction it has to be sent to VWMOSP.
It is also possible to check if a fuse has blown in the fusebox, so you will know
if the current or signal was sent.
There are three ways to check the correct functioning:
Live measures view in RaceStudio3.
-
Checking the fusebox control channels in Race Studio Analysis.
-
Checking the red LEDs on the fusebox.
-
If a malfunction is detected, it is necessary to control the corresponding wiring
or the device.
In the following table is shown the fuse analysis information:
Channel name: There are 5 channels to analysis.
-
Bit number: Each channel is able to control 8 fuses.
-
Data value: Is the value you can check on data acquisition
-
-
Channel name
FLAG_FBX_F5
GTI
TCR SEQ User Manual
Bit number
Data value
bit8
-------8
bit7
------7-
bit6
-----6--
bit5
----5---
bit4
---4----
bit3
--3-----
bit2
-2------
bit1
1-------
Volkswagen Golf GTI TCR SEQ User Manual
Description
Sadev pump
HR-ECU
HR-Fuel pump
Starter
Radio
HR-Lambda
HR-Miscellaneous
HR-Injectors
Page 23