Dampers - Volkswagen Golf GTI TCR SEQ 2019 User Manual

Volkswagen Motorsport
Volkswagen Golf
Example of unsafe area
Front:
When using the standard Bilstein damper with the "upright height adjuster" in position zero with the delivered
170-Ø60-110 main and 60-Ø60-2 helper spring the setup is safe at a ride height (splitter/subframe clearance)
up to about 70mm. If a ride height of 80mm is needed the clamp length has to be reduced by 10mm. For a
ride height higher than 80mm a longer spring would be necessary.
Rear:
When using the standard Bilstein damper with the delivered 170-Ø60-90 main and 60-Ø60-2 helper spring
(Eibach) the setup is safe at a ride height (at subframe) up to about 118mm. For a ride height higher than
118mm a longer spring or longer rod end would be necessary.
4.8

Dampers

Front dampers
Aluminium outer housing Bilstein damper
2-way adjustable with 10 clicks in bump and 10 in rebound
110 mm travel
20 mm upright height regulation
20 mm bump stop (5000 N / 4 mm)
Note:
Clicks adjuster tool delivered with the car.
-
GTI TCR SEQ User Manual
Volkswagen Golf GTI TCR SEQ User Manual Page 40