Brother DCP-J552DW Service Manual page 49

Code 1 Code 2
The remote terminal is not equipped with a confidential
32 11
mailbox function, or is not ready for receiving.
The remote terminal is not equipped with a relay function or is
32 12
not yet finished preparing it.
32 13 There are no confidential mails in the remote terminal.
The available memory space of the remote terminal is less than
32 14 the requirement for reception of the confidential or relay broad-
casting instruction.
The remote terminal is not equipped with cipher receiving
32 15
function.
32 16 The remote terminal is not equipped with SEP function.
32 17 The remote terminal is not equipped with SUB function.
32 18 The remote terminal is not equipped with color function.
40 02 An illegal coding system was requested.
40 03 An illegal recording width was requested.
40 05 There was an unauthorized ECM request.
Polling was received while preparations has not been
40 06
completed.
40 07 There was no document to send when polling was received.
There is no data in the box number specified by F Code
40 08
communications.
40 10 The country code or manufacturer code does not match.
A group number not registered in the relay broadcast was
40 11 prompted, or the broadcast receiver's total was prompted while
exceeding the maximum number of possible broadcasts.
Retrieval was performed even though the machine is not on
40 12
retrieval standby.
Polling was received from other manufacturer's products during
40 13
confidential polling stand-by.
There is no common key registration when the common key
40 14
was used.
Red-black receiving was prompted while red-black receiving is
40 15
disabled.
Cipher communication was requested while cipher receiving is
40 16
disabled.
40 17 An invalid resolution was selected.
Remote retrieval was prompted even though F Code remote
40 18
retrieval is disabled.
Remote registration was prompted even though F Code remote
40 19
registration is disabled.
40 20 An invalid full-color mode was requested.
The vertical resolution capability was changed after
50 01
compensating for the background color.
The password including the last four digits of the telephone
63 01
number does not match.
63 02 The password does not match.
Cause
2-16
Reference
Page
Section
4.9.3 "A
communicat
ions error
occurs"
Confidential