8
Tube support plate and head/carriage unit top: ink supply tube
Tube guide
(Rear)
Tube support plate
Note Bind the ink tubes with the two tube clamps. Bind magenta, cyan, and yellow together from
the bottom with tube clamp (1). Bind black, yellow, and cyan from the top with tube clamp (2).
Guide boss
Note Make sure that all of the four ink supply tubes are routed in front of the guide boss as shown
above.
Lower cover
Sponge
Tube support wire elbow
Head/carriage unit
Ink supply tubes
3-15
Yellow
Cyan
Magenta
Head joint spring
Head joint
Tube
clamp (1)
Tube
clamp (2)
Black
Yellow
Cyan
Magenta
Black
(3_021)
(3_022)
Confidential