Ac Power Operation; Removing The Battery Pack From The Player - Coby TF-DVD7700 Operating Instructions Manual

If the power is switched on while the battery pack is
not fully charged, the player operation may
sometimes become unstable. Be sure to charge the
battery pack fully before using.
The battery pack is being recharged slowly while the
player is playing with AC adapter connected.
The battery pack is being recharged as recharged
separately while the player is at STAND BY mode
with AC adapter connected.
After connecting the battery pack and power on,
press OSD button on remote control at PLAY
PAUSE or STOP status to show symbol
This symbol indicates capability of the battery pack.
While the battery pack has lower capacity,
will be flashed to remind you.

AC power operation

1 1
Connect the DC output plug of the AC
adapter to the DC IN jack on the player.
2 2
Connect the AC adapter to a power
outlet.
Now the player can be operated.
Removing the batter y pack from the player
The battery pack can be removed from the player as described below.
1
Turn off the power of the player.
2
Turning the battery knob anti-clockwise to remove battery pack
Using the Battery
" "
.
" "
CAUTION:
Be sure to use the AC adapter provided
with the player.
Before inserting or removing the DC
output plug of the AC adapter, always
be sure to turn off the power of the
portable DVD player.
-29-
.