Remote Control
•
Refer to the diagram. Remove the battery
compartment cover located on the rear of the
remote control. Insert batteries, making sure
to match their polarities (+/-) to the markings
on the inside of the compartment. Replace
the cover.
•
To use the remote, point it at the remote sen-
sor of the player. Operate the remote within
15 feet of the sensor and at an angle of +/- 60
degrees.
•
Batteries in the remote will last for approxi-
mately 1 year. Replace the batteries if the
remote control does not work. Do not mix
old with new batteries, or different types of
batteries.
•
Remove the batteries from the remote if it will
not be used for a long period of time.
WARNING
•
The battery used in this device may present a fire or chemical burn if mistreated. Do not
recharge, disassemble, incinerate, or heat the battery (~212ºF).
•
Keep batteries away from children.
Power Supply
Using the AC Power Adapter
This AC adapter should be used with
100-240V 50/60Hz AC wall outlets.
•
DC Out: 9V
•
DC Current: 2.0A min.
Caution:
•
Do not connect the power plug
to a power outlet other than that
which is indicated here and on
the label as this may result in the
risk of fire or electric shock.
•
Do not handle the power plug with wet hands. Doing so may cause electric shock.
•
Only use AC adapters of the type specified here. Failure to do so may case a fire or damage
the player.
GETTING STARTED
To DC 9V IN
2 x "AAA" 1.5V batteries
To wall outlet
(100-240V 50/60Hz)
13