Remote Control
•
Refer to the diagram. Remove the bat-
tery compartment cover located on the
rear of the remote control. Insert batter-
ies, making sure to match their polari-
ties (+/-) to the markings on the inside of
the compartment. Replace the cover.
•
To use the remote, point it at the remote
sensor of the player. Operate the re-
mote within 15 feet of the sensor and at
an angle of +/- 60 degrees.
•
Batteries in the remote will last for ap-
proximately 1 year. Replace the batter-
ies if the remote control does not work.
Do not mix old with new batteries, or
different types of batteries.
•
Remove the batteries from the remote
if it will not be used for a long period
of time.
WARNING
•
The battery used in this device may present a fire or chemical burn if mistreated. Do not
recharge, disassemble, incinerate, or heat the battery (~212 ○ F).
•
Keep batteries away from children.
Power Supply
Using the AC/DC Adapter
This AC/DC adapter should be used
with 100-240V 50/60Hz AC wall out-
lets.
•
DC Out: 9V
•
DC Current: .0A min.
Caution:
•
Do not connect the power plug
to a power outlet other than that
which is indicated here and on the
label as this may result in the risk
of fire or electric shock.
•
Do not handle the power plug with wet hands. Doing so may cause electric shock.
•
Only use AC adapters of the type specified here. Failure to do so may case a fire or damage
the player.
GETTING STARTED
- 1 -
To DC 9V IN
2 x "AAA" 1.5V batteries
To wall outlet
(100-240V 50/60Hz)