14 WX ALERT
Setting the weather Alert Feature, used for notifying storms and hurricanes, ON or OFF.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
ON
Enables the Weather Alert Feature.
OFF
Disables the Weather Alert Feature.
Remark
The default setting: OFF
SCAN Menu
1 DW TIME
When the dual receive function is active, the interval time at which the priority channel is
monitored can be set.
1. Press and hold the [F
2. Rotate the DIAL knob to select the monitoring interval from 0.1 sec to 10 sec.
Remark
The default setting: 5.0 sec (seconds)
2 SCAN LAMP
Set whether or not the LCD backlight is turned on when a signal is received during
scanning.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
ON
The LCD backlight will illuminate when a signal is received.
OFF
The LCD backlight will not illuminate when a signal is received.
Remark
The default setting: ON
3 SCAN RE-START
Set the time interval to resuming scanning after a received signal ends during scanning.
1. Press and hold the [F
2. Rotate the DIAL knob to select the time to resume scanning from 0.1 sec to 10 sec.
Remark
The default setting: 2.0 sec (seconds)
4 SCAN RESUME
Set the receive operation for when scanning stops.
1. Press and hold the [F
For details, refer to "Setting the Receive Operation When Scanning Stops" in the
Operating Manual.
] key touch [SIGNALING] [14 WX ALERT]
MENU
] key touch [SCAN] [1 DW TIME]
MENU
] key touch [SCAN] [2 SCAN LAMP]
MENU
] key touch [SCAN] [3 SCAN RE-START]
MENU
] key touch [SCAN] [3 SCAN RESUME]
MENU
55