Priority Revert; Gm Menu; Wires-X Menu; Config Menu - Yaesu FT5Dr Advance Manual

6 PRIORITY REVERT

Determines the operation of the PTT switch when pressed during the Dual Receive.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
OFF When a signal is received on Priority Memory Channel, duel receive
pauses, press the PTT switch to deactivate the Dual Receive operation
and transmit on the Priority Memory Channel.
(The Dual Receive does not resume.)
ON Press the PTT switch to transmit on the Priority Memory Channel.
Release the PTT switch to receive the Priority Memory Channel for about
five seconds, then Dual Receive operation continues.
Remark The default setting: OFF

GM Menu

For details on how to set each item, refer to "FT5DR/DE GM Function Instruction Manual"
which is available on Yaesu website.

WIRES-X Menu

For details on how to set each item, refer to "FT5DR/DE WIRES-X Instruction Manual"
which is available on Yaesu website.

CONFIG Menu

1 APO

Set whether or not to turn the transceiver OFF automatically if there is no operation for a
certain period of time.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
OFF
30 minutes to
12 hours
Remark The default setting: OFF
• When the auto power-off function is active,
• Once the time for automatic power-off is set, the new setting is retained. Unless "OFF" is
selected in step 3, the next time the transceiver is turned on, if you perform no operation
for the set period of time, the transceiver will automatically turn OFF.)
] key  touch [SCAN]  [6 PRIORITY REVERT]
MENU
] key  touch [CONFIG]  [1 APO]
MENU
Does not turn the power OFF automatically.
Turns off the power when no operation is performed for a specified
period of time.
[
appears on the LCD.
57