10 SQL EXPANSION
You can add squelch types to [11 SQL TYPE] for transmit and receive, respectively.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
ON
Add squelch types for transmit and receive, respectively.
OFF
Does not add squelch types for transmit and receive, respectively.
Remark
The default setting: OFF
11 SQL TYPE
Select [11 SQL TYPE] to open the squelch only when a signal containing the specified
tone or code is received.
For details, see "Selecting the Squelch Type in the Analog FM Mode" (page 9).
12 TONE SQL FREQ
Select [12 TONE SQL FREQ] to select the tone frequency from 50 types between 67.0
Hz and 254.1 Hz.
For details, see "Setting CTCSS Tone frequency" (page 10).
13 TONE SEARCH
The audio may be muted during tone search. The operation speed of the tone search can
also be changed.
1. Press and hold the [F
2. Rotate the DIAL knob to select [MUTE], then press the [F
3. Rotate the DIAL knob to select the desired setting.
ON
Mutes the audio during the tone search operation.
OFF
Does not mute the audio during the tone search operation.
Remark
The default setting: ON
4. Press the [BACK] key.
5. Rotate the DIAL knob to select [SPEED], then press the [F
6. Rotate the DIAL knob to select the desired setting.
FAST
Speed up the tone search operation.
SLOW
Slow down the tone search operation.
Remark
The default setting: FAST
For details, see "Searching for the CTCSS Tone transmitted by the other Station"
(page 10).
] key touch [SIGNALING] [10 SQL EXPANSION]
MENU
] key touch [SIGNALING] [13 TONE SEARCH]
MENU
54
] key.
MENU
] key.
MENU