Audio; Mic Gain; Mute; Rx Af Dual - Yaesu FT5Dr Advance Manual

3 AUDIO

1 MIC GAIN

You can adjust the input level of the built-in microphone or an optional external micro-
phone.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired microphone sensitivity level.
3. Select a microphone gain level from LEVEL 1 to LEVEL 9.
Remark The default setting: LEVEL 5
• Increasing the microphone gain excessively can distort the sound or pick up the
surrounding noise, impairing intelligibility.
• Be sure to check the microphone gain whenever the microphone is changed.

2 MUTE

In dual receive mode, while receiving signals in the operating band and subband at the
same time, the subband can be automatically muted (100%, 50%, 30%) or not muted.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired mute setting.
OFF
MUTE 30%
MUTE 50%
MUTE 100% Mute the audio level set to 100%.
Remark The default setting: MUTE 100%

3 RX AF DUAL

Set the time to resume radio broadcast reception after transmit/receive when using simul-
taneously receive mode.
Press and hold the [F
For details, see "AF-DUAL Receive Function" (page 32).

4 SP SELECT

Speaker operation switching settings when connecting to an External SP/MIC or an
Earpiece Microphone.
1. Press and hold the [F
2. Rotate the DIAL knob to select the desired setting.
AUTO
FIX
Remark The default setting: AUTO
] key  touch [TX/RX]  [3 AUDIO]  [1 MIC GAIN]
MENU
] key  touch [TX/RX]  [3 AUDIO]  [2 MUTE]
MENU
Disable the muting audio.
Mute the audio level set to 30%.
Mute the audio level set to 50%.
] key  touch [TX/RX]  [3 AUDIO]  [3 RX AF DUAL].
MENU
] key  touch [TX/RX]  [3 AUDIO]  [4 SP SELECT]
MENU
The receiver audio is heard only from only the external SP/MIC.
The receiver audio is heard from both the external SP/MIC and the of
the transceiver speaker.
50