Quick Guide; Enter The Comm, Memory And Wx Modes; Adjust Frequency; Store Frequencies To Memory - Yaesu FTA-250L Operating Manual

PTT switch
Flip-Flop key
F
GROUP key
DWN key
FUNC key
Numeric keys
BACK key

Enter the COMM, MEMORY and WX modes

Press the [ MAIN/SET ] key, and then press one of the
following keys:
[ DWN ] key à COMM (
[ GROUP ] key à MEMORY (
[ UP ] key à WX (

Adjust frequency

● Press the [ DWN ] or [ UP ] key.
● Enter the frequency with the numeric keys.
8

Quick Guide

MAIN/SET key
UP key
ENT key
121.5 key
) mode
) mode
) mode

Store frequencies to memory

Tune to the frequency à Press and hold the [ ENT ]
key à Press the [ GROUP ] key to select the Group à
Press the [ DWN ] or [ UP ] key to select the Channel à
Press and hold the [ ENT ] key à Press and hold the
[ ENT ] key again.

Recall a memory channel

Press the [ GROUP ] key à Press the [ GROUP ] key to
select the Group à Press the [ DWN ] or [ UP ] key to
select the Channel

Recall six frequently used functions

Each time the [ FUNC ] key is presses; a function call
screen is displayed.
Return to previous operating frequencies or
memory channels
Each time the [ Flip-Flop ] ( ▲/▼ ) key on the side is
pressed, up to 9 previous operating frequencies and
memory channels may be recalled in order.
Call the emergency communication
frequency (121.5 MHz)
Holding down the [ 121.5 ] key will produce four beeps
and enter the emergency frequency mode.
To cancel the emergency mode, press the [ BACK ]
key, then press the [ DWN ](
FTA-250L O
) key.
M
perATing AnuAL