Honda Pioneer SXS700M2P 2019 Owner's Manual page 93

Starting the engine:
1. Apply the parking brake.
2. Make sure the shift select lever is in neutral. Press on the brake
pedal.
3. To start the engine, without touching the accelerator pedal,
insert the key and turn the ignition switch to the START (p)
position.
Immediately after the engine starts, let go of the key. The switch
returns to the ON (q) position.
Do not hold the key in the START (p) position for more than 5
seconds at a time.
If the engine does not start after 5 seconds, turn the key back to
the OFF (w) position and wait about 10 seconds before turning it
to START (p) again.
4. If the engine does not start within 5 seconds, or starts but stalls
right away, repeat step 3 with the accelerator pedal pressed
halfway down.
If the engine starts, release pressure on the accelerator pedal so
the engine does not race.
5. If the engine fails to start, press the accelerator pedal all the way
down, and hold it there while starting to clear flooding. If the
engine still does not start, return to step 3.
Basic Operation
ignition switch
Basic Operation & Driving Guidelines
OFF (w)
START (p)
ON (q)
83