Honda Pioneer SXS700M2P 2019 Owner's Manual page 223

Installation
1. Thoroughly clean hub and wheel.
2. Position the wheel.
3. Position the wheel nuts so that the tapered sides face the wheel
rim.
4. Hand-tighten the wheel nuts on the wheel, then lower the
Honda SXS to the ground before tightening the nuts in a
crisscross (rather than circular) pattern to the specified torque:
133 N·m (13.6 kgf·m, 98 lbf·ft)
If a torque wrench was not used for installation, see your dealer as
soon as possible to verify proper assembly. Improper assembly may
lead to loss of control and braking capability.
If You Have a Flat Tyre
Taking Care of the Unexpected 213