Honda Pioneer SXS700M2P 2019 Owner's Manual page 228

If a Fuse Blows
Circuit Fuse Access
5. To access the circuit fuse, remove the front hood (page 119).
6. Remove the fuse box cover then, open the fuse cover.
7. To check or replace a circuit fuse, pull the old fuse out. If the fuse
is blown, replace it with a spare fuse of the same rating.
If you do not have a replacement fuse with the proper rating for the
circuit, install one with a lower rating.
NOTICE
Replacing a fuse with one that has a higher rating greatly increases
the chance of damage to the electrical system.
8. Install the fuse cover and fuse box cover.
9. Install the front hood.
spare fuses
circuit fuses
218 Taking Care of the Unexpected
spare main fuse fuse box cover
fuse cover