Honda Pioneer SXS700M2P 2019 Owner's Manual page 67

Rear (SXS700M4P only)
1. Insert the end latch plate into the outboard buckle first.
2. Insert the middle latch plate into the inboard buckle, then tug on
the belt to make sure they are both securely latched.
OUTBOARD
3. Check that the belt is not twisted, because a twisted belt can
cause injuries.
4. Position the lap part of the belt as low as possible across your
hips, then pull up on the shoulder part of the belt to make sure
the lap part is snug. This keeps you connected to the vehicle and
lets your strong pelvic bones take the force of a crash.
5. Make sure the shoulder part of the belt goes over your shoulder
and rests against your chest.
To unlatch a seat belt, press the red PUSH button on the buckles.
latch plate
buckle
Seat Belts
INBOARD
Instruments & Controls
latch plate
buckle
57